Pegasus Auto Racing Supplies
A 100% employee owned company
| Today's Featured Items | |||
|---|---|---|---|
Tillett C1 Carbon Racing Seat, FIA 8855-1999 Tillett combines lightweight, safety, and comfort all into one package with their full containment C1 carbon fiber seat, weighing just 15lbs. |
Motul NISMO Synthetic Competition 75W140 Differential Oil 100% synthetic Motul NISMO Competition 75W140 Differential Oil (2189E) has been developed specifically for Nissan Racing differentials. 2189E is officially recommended by Nissan for the R35 GT-R. |
Wurth Multi-Purpose Solvent, 14 oz Aerosol Can Wurth Multi-Purpose Solvent is a concentrated, 50-state VOC compliant spray cleaner and degreaser that dries quickly and leaves no residue. | |
MyLaps TR2 go Rechargeable Car/ Motorcycle Transponder The red MyLaps TR2 Transponder replaces the rechargeable X2 and TranX 260 for cars and motorcycles. The TR2 go includes a lifetime subscription. |
Cartek GT Battery Isolator Kit with Red External Button The Cartek GT Battery Isolator is an FIA-approved solid-state electrical master kill switch that eliminates long, heavy battery cables. Includes red trigger button. |
Weber Rebuild Kit for 32/36 DGV / DGAV / DGEV Carburetor Our Weber 23/36 DGV Carburetor Rebuild Kit includes Weber 32/36 DGV 200 Needle and Seat Assembly, DGV Accelerator Pump Diaphragm Assembly and gasket set. | |
AiM XLog Extra Small Data Logger, 2M CAN/RS232 Cable Not all applications have the means to record all the information you want. CAN paired with an accelerometer allows data playback via Race Studio. |
MOMO Prototipo Tuning Steering Wheel, Black Spoke, 320mm MOMO's classic Prototipo steering wheel design is perfect for providing an elegant look while maintaining great driver feel. |
SuperTrapp 1.312" Clamp-On Flange with End Cap for 3S Series This Clamp-On Flange with an end clamp is for a 3S Series SuperTrapp muffler. Fits a 1.312" diameter exhaust pipe, and includes a clamp, end cap with collection chamber, and center retaining bolt. | |
Aurora Wide Series PTFE-Lined Spherical Bearing These Aurora Spherical Bearings have a wider ball and race than other designs. The heat treated ball and alloy steel, PTFE-lined race provide great durability. |
Canton 4.25" Machined Aluminum Spin-On Oil Filter This Canton 4.25" machined aluminum, spin-on oil filter is easily disassembled for engine damage inspection, and the super-strong extruded aluminum housing is durable. |
Covered Stainless Braided PTFE Brake and Clutch Hose, Black Our black -3 and -4 PTFE hose has an extruded plastic cover over the stainless steel outer braid. Withstands operating pressures of 4205 psi. | |
Wilwood WLD20 Aluminum Caliper, 1.75 Pistons This Wilwood forged aluminum 2-piston caliper is a direct bolt-on replacement for the discontinued cast iron AP/Lockheed LD20 caliper. No machining or adapting is required. |
Sock Filter with Adapter for Bosch FP200 Fuel Pump Install this kit on the inlet of your Bosch 044 Fuel Pump when the pump is submerged in the tank. Includes a 31-micron filter and a special aluminum adapter. |
7/16-20 Male to 5/16" Hose Barb - Aluminum This barbed aluminum adapter is designed to connect your 5/16 ID reservoir hose to the 7/16-20 inlet port on your Girling or Lockheed master cylinder. | |
Chillout 4" Carbon Fiber NACA Duct Keeping true to Chillout's "lighter is faster" here is their carbon fiber NACA duct to duct airflow from the car body to the chillout unit. |
Fuel Safe 6 Gallon Dump Can, White Plastic This sturdy but lightweight 6-gallon plastic dump can from Fuel Safe features a carrying handle on one side with a secure filler/vent cap. |
In-Line Fuel Filter, 10 Micron Cellulose, 6AN Male, Black Keep your injectors clean with this in-line fuel filter, filtering down to as small as 10 microns and flowing 250gph. 6an fittings on the ends. | |
PFC Racing Brake Pads, FF, Lockheed LD19 (PD26/11) These PFC Racing Brake Pads fit the smaller Lockheed LD19 caliper (1.62 diameter pistons) used on many Formula Ford 1600 cars. |
Blue Silicone Hose, 1 5/8" I.D. 90 degree Elbow, 4" Legs Our 90 degree elbows are designed for coolant or intake plumbing. Classic Blue silicone rubber hose has 3-ply reinforcement. 41mm nominal ID fits over 1 5/8" OD tubes. |
3AN Hose End Tee with Locating Lug, Stainless Steel This 3AN Hose End tee fitting has 3AN hose ense built into all three ports accepting standard -3 hose. The locating tab lets you mount the tee solidly in place. | |
Top Quality, Huge Selection and Very Competitive Prices on Silicone Hose
Nearly 1,000 different part numbers are now in stock from 1/2 inch to 6 inch inside diameter. Available in black, blue or red. Save on our durable, heat-resistant, high-quality Silicone Hose. Great for coolant or turbo intake plumbing. We make it easy to find the hoses that you need:  Gates PowerGrip Hose Clamps |
Congrats to Robert Pink of Humble Texas
Robert is the most recent winner in our $5,000 sweepstakes. Every time you place an order you'll be entered. No purchase necessary. Other past winners include: Jeff Oglesby of Spanish Fort AL |
Special Message for International Customers
Export orders make up a significant portion of our sales. Because of our high volume of international shipments, we have been able to negotiate reduced rates for expedited shipping to foreign destinations. Information on International Shipping
Pegasus Supports Racing2004 thru 2026 SCCA Runoffs® Contingency Sponsor 2012 thru 2026 Vintage Sports 2000 Series Sponsor 2014 thru 2026 Formula 600 Challenge Series Sponsor VSCDA Driver's School Sponsor NSSCC Driver's School Sponsor and many other events | |
| New: Take a Virtual Tour of our Showroom and Warehouse (go through the double doors to the left of the Hawk banner to get to the warehouse) |
|---|
Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA
In addition to our large warehouse, we also have a small showroom and customer service counter. If you're in the area, feel free to stop by!