Pegasus is your source for Apex Mil-Spec Universal Joints!
 
 
 
Check us out on Instagram
 
Your IN STOCK source for quality racing supplies!
 
Follow us on facebook
 
 
 

Pegasus Auto Racing Supplies

41 years of great service since 1980

 
 
Today's Featured Items
Hyperco High-Performance Chassis Springs, 2 1/4" I.D.
Hyperco High-Performance Chassis Springs, 2 1/4" I.D.

Hyperco springs have a long track record of success in nearly all of the upper levels of auto racing. We carry a many sizes in 2.25" ID for coil-over shocks.

High Strength Alloy Series Male Rod End, PTFE Lined
High Strength Alloy Series Male Rod End, PTFE Lined

PTFE-lined Aurora AM / AB Series rod ends provide strength, durability and safety at a modest price. These bearings are very resistant to loosening even when subjected to severe racing conditions.

Girling Master Cylinder Repair Kit
Girling Master Cylinder Repair Kit

Rebuild your brake and clutch master cylinders before they fail! Top racing teams rebuild them each season for best reliability. Our genuine Girling repair kits fit single-circuit Girling masters.

Facet Dura-Lift 12v Fuel Pump, 1/8 NPT, 4-7 psi, 120" lift
Facet Dura-Lift 12v Fuel Pump, 1/8 NPT, 4-7 psi, 120" lift

Facet Dura-Lift pumps are able to draw fuel from farther away than standard Facet pumps. This pump can lift up to 120 inches and can deliver up to 33 GPH.

Dated 2026!
Schroth Profi 3x2 FIA Harness, 3" Shoulder 2" Lap, Pull Up
Schroth Profi 3x2 FIA Harness, 3" Shoulder 2" Lap, Pull Up

The Schroth Profi 3x2 is an FIA 8853-2016 approved 6 point camlock harness designed for professional sprint racing. The 3 inch shoulder straps are approved for use with or without a HANS Device.

(LI) Antigravity ATX-20 RS 12v Lithium Battery, 680 CA
(LI) Antigravity ATX-20 RS 12v Lithium Battery, 680 CA

This lightweight Lithium-Iron (LiFePO4)20-Cell 12 volt battery is the same size as the YTX-20 motorcycle battery but it offers a whopping 680 cranking amps

Neoprene 2-ply Air Duct Hose, 300F, Black Only
Neoprene 2-ply Air Duct Hose, 300F, Black Only

Neoprene Air Duct Hose has a fiberglass fabric cover and is extremely flexible and pliable with support preventing it from collapsing. 300 degree temperature limit.

Price Reduced!
AiM KA 0-150 psi (10 bar) Oil Pressure Sensor, 1/8 NPT
AiM KA 0-150 psi (10 bar) Oil Pressure Sensor, 1/8 NPT

This rugged 0-150 psi pressure sensor is suitable for measuring fuel or oil pressure. It is compatible with all AiM auto dashes and AiM EVO3/EVO4 data loggers.

Motul 300V Racing Engine Oil
Motul 300V Racing Engine Oil

100% synthetic Motul 300V Racing Engine Oil utilizes the most advanced ESTERCore Technology to provide maximum power output without compromising reliability and wear.

SFI Approved High Density Foam, 1" thick sheet
SFI Approved High Density Foam, 1" thick sheet

SFI Approved High Density Foam Padding prevents helmeted heads from contacting solid objects. These 1" thick sheets can also be used for rigid seat inserts.

Aluminized Heat Barrier, Adhesive Backed
Aluminized Heat Barrier, Adhesive Backed

Our Adhesive Backed Aluminized Heat Barrier Cloth protects sensitive components from heat. The reflective surface withstands radiant temperatures of 2000F.

Facet Fuel Filter, Male 1/8 NPT to 5/16 Hose Barb, 74 Micron
Facet Fuel Filter, Male 1/8 NPT to 5/16 Hose Barb, 74 Micron

This 74 micron filter has a male 1/8 NPT outlet to fit any fuel pump with 1/8 NPT female ports. The barbed inlet fitting accepts 5/16" (8mm) ID rubber fuel hose.

The "Dream Stick" Toe Measurement Tool from ART
The "Dream Stick" Toe Measurement Tool from ART

The ART Dream Stick measures toe from your parallel strings or ART Laser String. Shows the distance to both the front and back of the rim at the same time.

Setrab Series 6 Oil Cooler, 16 Row, M22 Ports
Setrab Series 6 Oil Cooler, 16 Row, M22 Ports

The brazed aluminum construction of the Setrab Series 6 Oil Cooler provides the maximum cooling capacity in the smallest possible space, with minimal pressure drop.

Blue Silicone Hose, 2" I.D. 45 degree Elbow, 6" Legs
Blue Silicone Hose, 2" I.D. 45 degree Elbow, 6" Legs

Our 2.00 inch ID 45 Degree Elbows are designed for custom coolant and intake plumbing. Blue silicone hose has 4 ply reinforcement and extended 6 inch legs.

Racetech 110 C Water Temperature Gauge
Racetech 110 C Water Temperature Gauge

Racetech mechanical gauges are original equipment on many British formula cars. These easy-to-read 2 1/16" gauges display water temperature to 110C.

Price Reduced!
Hawk Brake Pad: Wilwood BDL, FDL w/Cotter Pin
Hawk Brake Pad: Wilwood BDL, FDL w/Cotter Pin

These Hawk Performance brake pads fit the Wilwood Forged Dynalite (FDL) and Billet Dynalite (BDL) racing calipers using a cotter pin retainer (replaces Wilwood pad shape 7112).

Camloc 4002 Series Standard Receptacle
Camloc 4002 Series Standard Receptacle

This Camloc 4002 Series standard receptacle is installed on the back of your stationary structure and accepts a Camloc 4002 Series Heavy Duty Stud.

Beta Tools - Preferred by Professional Race Mechanics for over 50 years
New: Beta Tools, Preferred by Professional Race Mechanics for over 50 years

Beta Tools began manufacturing professional-grade tools in Italy in 1939. Now in their third generation of family ownership, Beta Tools are manufactured in 3 Italian factories. Partnerships with leading Formula 1 and MotoGP teams keep Beta Tools in touch with the needs of professional racing mechanics.
 
Beta Tools C25 TANK Trolley with Shelf

Top Quality, Huge Selection and Very Competitive Prices on Silicone Hose
We stock 800 sizes and styles of Silicone Hose

Nearly 1,000 different part numbers are now in stock from 1/2 inch to 6 inch inside diameter. Available in black, blue or red. Save on our durable, heat-resistant, high-quality Silicone Hose. Great for coolant or turbo intake plumbing.

We make it easy to find the hoses that you need:

Browse by Shape

Browse by Inside Diameter

Hose Splicing Nipples

Gates PowerGrip Hose Clamps

Fuel-Compatible Silicone Hose

Jabroc Skid Plate Material
Pegasus is the North American source for Jabroc

Pegasus now stocks Jabroc Skid Plate Material in 7 thicknesses ranging from 4mm (0.16 inch) to 25mm (0.98 inch). Standard sheet sizes are 50cm x 50cm (approx. 19.5 inches square) and 50cm x 100cm (approx. 19.5 x 39 inches). Jabroc's predictable friction and wear properties make it an ideal skid plate material. Jabroc also has many industrial uses. It's half as strong as steel but only one fifth the weight! Machines easily, is non-sparking and non-conductive.

Jabroc Skid Plate Material

New - Expanded Selection of AN Bolts including many with a Drilled Head and Drilled Shank
We now stock many more sizes of AN Bolts including many with Drilled Heads and/or Drilled Shanks

We now stock nearly 1,000 different sizes of AN bolts!

Our airframe bolts are manufactured from heat treated and cadmium plated Type 4037 alloy steel. They conform to military specifications and every lot must pass stringent testing at every step of the manufacturing process. AN bolts have excellent toughness and impact resistance. When subjected to a destructive force, they will bend before breaking - often avoiding a catastrophic failure. A Grade 8 SAE bolt may have a higher ultimate strength. However, the Grade 8 bolt often fails without warning by having the head pop off.

Congrats to Daniel DeBell of Trumansburg New York
Congratulations to Daniel DeBell - our most recent winner

Daniel is the most recent winner in our $5,000 sweepstakes. Every time you place an order you'll be entered. No purchase necessary.

Official Sweepstakes Rules

Other past winners include:

Devin Cazin of Wake Forest NC
Bob Viau of Mahtomedi MN
Brian Garcia of St. Charles IL
Wayne Thompson of Lisbon CT
Mike O'Neill of Delafield WI
Lance Renshaw of St. Charles IL
David Porter of Darien CT
Alan Walker of Canton CT
Rob Langley of Titusville FL
Kirk Biszick of Huntsville AL
Chris Musumeci of Concord NH
Carl Jensen of Sacramento CA
Jim Terry of Houston TX
Tim Parker of Stillwater MN

Special Message for International Customers
"I could not believe how quick the shipping was to Australia and the price, well it was so cheap that I didn't believe it would arrive so quickly. I bought something else from another city in Australia which took longer to arrive than the one from Pegasus in the USA. Well Done Pegasus Racing!" - E.S. from Adelaide

Export orders make up a significant portion of our sales. Because of our high volume of international shipments, we have been able to negotiate reduced rates for expedited shipping to foreign destinations.

Information on International Shipping

 

Pegasus Supports Racing

2004 thru 2021 SCCA Runoffs® Contingency Sponsor

2012 thru 2021 Vintage Sports 2000 Series Sponsor

2014 thru 2021 Formula 600 Challenge Series Sponsor

VSCDA Driver's School Sponsor

NSSCC Driver's School Sponsor

and many other events

New: Take a Virtual Tour of our Showroom and Warehouse
(go through the double doors to the left of the Hawk banner to get to the warehouse)

Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA - Click here to take a virtual tour of our showroom and warehouse.
Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA

We have a small showroom and customer service counter adjacent to our large warehouse - Click here to take a virtual tour of our showroom and warehouse.
In addition to our large warehouse, we also have a small showroom and customer service counter. If you're in the area, feel free to stop by!

Our expanded warehouse
Click the above photo for a behind the scenes look at our warehouse expansion project.